Hamid -
Creating your own EPW format is difficult and you likely have an invalid entry at 2200 hours. You can use a combination of Type9 and Type16 to read you own weather data.
Regards,
Tim
---
Timothy P. McDowell Executive Vice President Thermal Energy System Specialists, LLC 3 N Pinckney St, Suite 202 Madison, WI 53703 office: 608-274-2577 cell: 608-225-5250
On 2019-05-16 06:43, Hamidreza Esfehani via TRNSYS-users wrote:
Dear all,
Anybody has experience with EPW (Energy+) format for weather data ?
I tried to use my own weather data which I saved as EPW format, but when call the data through the type 15-3 and I run an annual simulation I get error after 2200 hours!
Any help/hint would be much appreciated!
Best,
Hamid
Hamidreza Heidar Esfehani
Wissenschaftlicher Mitarbeiter|Research Associate
Leibniz Universität Hannover
IEK Abt.Gebäudetechnik
Herrenhäuser Str. 8
30419 Hannover
Telefon : +49 (0)511 762 3811
Fax : +49 (0)511 762 3016
hamidreza.esfehani@iek.uni-hannover.de
www.iek.uni-hannover.de/gebaeudetechnik
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org