Hi Tim,
Thanks for your reply.
Actually I created the EPW file by software „elements“, which is used specifically to create EPW weather data, and it works perfectly, I even plotted the EPW data and there was not invalid data inside.
Type9 + Type 16 or Type99 don’t provide the same outputs provided by Type15 (TRY), which is then used by Type 56.
Regards
Hamid
Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] Im Auftrag von Tim McDowell via TRNSYS-users
Gesendet: Donnerstag, 16. Mai 2019 16:11
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>
Cc: Tim McDowell <mcdowell@tess-inc.com>
Betreff: Re: [TRNSYS-users] Problem with weather type 15-3
Hamid -
Creating your own EPW format is difficult and you likely have an invalid entry at 2200 hours. You can use a combination of Type9 and Type16 to read you own weather data.
Regards,
Tim
---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
3 N Pinckney St, Suite 202
Madison, WI 53703
office: 608-274-2577
cell: 608-225-5250
On 2019-05-16 06:43, Hamidreza Esfehani via TRNSYS-users wrote:
Dear all,
Anybody has experience with EPW (Energy+) format for weather data ?
I tried to use my own weather data which I saved as EPW format, but when call the data through the type 15-3 and I run an annual simulation I get error after 2200 hours!
Any help/hint would be much appreciated!
Best,
Hamid
Hamidreza Heidar Esfehani
Wissenschaftlicher Mitarbeiter|Research Associate
Leibniz Universität Hannover
IEK Abt.Gebäudetechnik
Herrenhäuser Str. 8
30419 Hannover
Telefon : +49 (0)511 762 3811
Fax : +49 (0)511 762 3016
hamidreza.esfehani@iek.uni-hannover.de
www.iek.uni-hannover.de/gebaeudetechnik
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org