Re: [TRNSYS-users] Question on Type 15-1 (TMY Weather file)

dear all ;

how can i control run this circled heat pump to work on heating mode in winter and cooling mode in summer.

best regards

On Monday, February 22, 2016 6:06 PM, Eirini Mantesi <E.Mantesi@lboro.ac.uk> wrote:

Hi Jakob,

Thank you for your prompt response.

Unfortunately, both the restaurant and the sunspace examples use Type 15-6 and Type 15-2 (TMY-2). My problem is that when I replace to Type 15-1 (TMY), my heating demand is increased, but remains within the BESTEST range, while my cooling demand is significantly below the BESTEST results. That's how I concluded that most probably I am doing something wrong in the connection of the weather file and the solar radiation available in the building's surfaces.

Thank you for your help anyway.

Kind Regards,

Eirini

Eirini Mantesi

Research Engineer

School of Civil and Building Engineering

Loughborough University

T: +447462665904

E: E.Mantesi@lboro.ac.uk

From: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> on behalf of hotline <hotline@Transsolar.com>
Sent: Monday, February 22, 2016 3:46 PM
To: TRNSYS users mailing list at OneBuilding.org
Subject: Re: [TRNSYS-users] Question on Type 15-1 (TMY Weather file)

Dear Eirini,

you can find an example in your TRNSYS directory under …\Examples\Restaurant\Restaurant.tpf

It also uses types 15 and 56…

Best regards
Jakob Merk

_________________________________________________________________________________________________

Jakob Merk

TRNSYS Software Team

Transsolar Energietechnik GmbH

Curiestraße 2

70563 Stuttgart

Fax: +49 711 67976-45
Email: hotline@transsolar.com

Web: www.trnsys.de

Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] Im Auftrag von Eirini Mantesi
Gesendet: Montag, 22. Februar 2016 16:43
An: TRNSYS users mailing list at OneBuilding.org
Betreff: [TRNSYS-users] Question on Type 15-1 (TMY Weather file)

Hello TRNSYS Users,

I am trying to simulate a simple building (BESTEST Case 600) and I am getting quite odd results. I believe that my mistake is in the connection between Type 15-1 (TMY Weather file) and Type 56 (Multi-zone building). I would like to ask whether there is any tutorial online or any example in the program's documentation folder on how to connect weather files to Type 56 for multi-zone building simulation.

Thank you.