Mohammad,
The simplest way would be to define two equations one of which has
a value of 1 during the time period when you want to allow cooling
and the other of which has a value of 1 during the heating time
period. For example:
isSummer = AND(GT(TIME,3000),LT(TIME,5000))
isWinter = 1-isSummer
You then connect the result of these equations to the appropriate
heat pump inputs. The above equations would allow cooling between
hour 3000 and 5000 of the simulation and would allow heating at all
other times. You have to be a bit more careful with your equation if
you want to run multiyear simulations.
kind regards,
David
On 02/28/2016 14:26, MOHAMMAD MATARNEH
wrote:
dear all ;
how can i control run
this circled heat pump to work on heating mode in winter and
cooling mode in summer.
best
regards
Hi Jakob,
Thank you for your prompt response.
Unfortunately, both the
restaurant and the sunspace
examples use Type 15-6 and Type 15-2 (TMY-2).
My problem is that when I replace to Type 15-1
(TMY), my heating demand is increased, but
remains within the BESTEST range, while
my cooling demand is significantly below the
BESTEST results. That's how I concluded that
most probably I am doing something wrong in the
connection of the weather file and the solar
radiation available in the building's surfaces.
Thank you for your help anyway.
Kind Regards,
Eirini
Eirini
Mantesi
Research
Engineer
School
of Civil and Building
Engineering
Loughborough
University
T:
+447462665904
Dear Eirini,
you can find an example
in your TRNSYS directory under
…\Examples\Restaurant\Restaurant.tpf
It also uses types 15 and
56…
Best regards
Jakob Merk
_________________________________________________________________________________________________
Jakob
Merk
TRNSYS
Software Team
Transsolar
Energietechnik GmbH
Curiestraße
2
70563
Stuttgart
Von:
TRNSYS-users
[mailto:trnsys-users-bounces@lists.onebuilding.org]
Im Auftrag von Eirini
Mantesi
Gesendet: Montag, 22.
Februar 2016 16:43
An: TRNSYS users mailing
list at OneBuilding.org
Betreff: [TRNSYS-users]
Question on Type 15-1 (TMY Weather
file)
Hello TRNSYS Users,
I am trying to simulate a
simple building (BESTEST Case
600) and I am getting quite odd
results. I believe that my mistake
is in the connection between Type
15-1 (TMY Weather file) and Type 56
(Multi-zone building). I would like
to ask whether there is any tutorial
online or any example in the
program's documentation folder on
how to connect weather files to Type
56 for multi-zone building
simulation.
Thank you.
Kind Regards,
Eirini
Eirini Mantesi
School of Civil
and Building Engineering
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
|