|
Hi Jakob,
Thank you for your prompt response.
Unfortunately, both the restaurant and the sunspace examples use Type 15-6 and Type 15-2 (TMY-2). My problem is that when I replace to Type 15-1 (TMY), my heating demand is increased, but remains within the BESTEST range, while my cooling demand is significantly below the BESTEST results. That's how I concluded that most probably I am doing something wrong in the connection of the weather file and the solar radiation available in the building's surfaces.
Thank you for your help anyway.
Kind Regards, Eirini
Eirini
Mantesi
Research
Engineer
School
of Civil and Building Engineering
Loughborough
University
T:
+447462665904
E:
E.Mantesi@lboro.ac.uk
From: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> on behalf of hotline <hotline@Transsolar.com>
Sent: Monday, February 22, 2016 3:46 PM To: TRNSYS users mailing list at OneBuilding.org Subject: Re: [TRNSYS-users] Question on Type 15-1 (TMY Weather file) Dear Eirini, you can find an example in your TRNSYS directory under …\Examples\Restaurant\Restaurant.tpf It also uses types 15 and 56…
Best regards
_________________________________________________________________________________________________
Jakob Merk TRNSYS Software Team
Curiestraße 2 70563 Stuttgart
Fax: +49 711 67976-45 Web: www.trnsys.de
Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org]
Im Auftrag von Eirini Mantesi
Hello TRNSYS Users,
I am trying to simulate a simple building (BESTEST Case 600) and I am getting quite odd results. I believe that my mistake is in the connection between Type 15-1 (TMY Weather file) and Type 56 (Multi-zone building). I would like to ask whether there is any tutorial online or any example in the program's documentation folder on how to connect weather files to Type 56 for multi-zone building simulation.
Thank you.
Kind Regards, Eirini
Eirini Mantesi Research Engineer School of Civil and Building Engineering Loughborough University T: +447462665904 |