Hi everyone,
I’m Simulating a Heat pump (TYPE 401) connected to a heat exchanger which is immersed in a heat storage (please see picture enclosed). After some time, the simulation stop because
of the following error :
“water in the store is ice at I: 56 J:2 T:-0.2…”
And this could be because of the outlet temperature of the evaporator (the input to the HX immersed in the Heat storage) which may be lower than 0
I’m simulation the heat storage with Type 340, and I change the thermal properties of the fluid in the storage so I can assume that I have water mixed with antifreeze but also the
same error.
My question is : is Type 340 just for water or we can we use any kind of fluid?
Have anyone an answer for this question or an idea to solve this problem?
Thank for your cooperation
Hassan
Dr. Hassan Mahach
wissenschaftlicher Mitarbeiter
Arbeitsfeld Technische Innovationen
+49 681 844 972 23
mahach@izes.de
www.izes.de
IZES gGmbH | Altenkesseler Straße 17, Geb. A1 | 66115 Saarbrücken
Büro Berlin | Albrechtstraße 22 | 10117 Berlin
Telefon: +49 681 844 972 0 | Fax: +49 681 761 799 9
Rechtsform: gGmbH | Registergericht Saarbrücken HRB 8499
Steuernummer: 040 140 241 53 | USt.-IdNr.: DE 138 113 796
Aufsichtsratsvorsitz: Ministerpräsidentin Anke Rehlinger
Geschäftsführung: Prof. Frank Baur | Dr. Lesya Matiyuk
