[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] TRNbuild not generating shading/insolation matrix



Dear Santiago Escudero,

 

A quick feed back

As indicated in the log file the windows on surface 89 ( zone/ airnode 8B51C1 ) are somehow causing the problem.

 

When I remove these windows everything is generated successfully.

At the moment, I’m not sure why this wall doesn’t work.

I’ll keep you updated.

 

Marion



 

 

 

Transsolar Software Team

hotline@transsolar.com

 

Transsolar

Stuttgart | Munich | Paris | New York

 

Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany

CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

 

 

Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> Im Auftrag von Santiago Escudero via TRNSYS-users
Gesendet: Freitag, 11. Februar 2022 14:41
An: trnsys-users@lists.onebuilding.org
Cc: Santiago Escudero <sescudero@irec.cat>
Betreff: [TRNSYS-users] TRNbuild not generating shading/insolation matrix

 

Deat TRNSYS-users,

 

I am having issues to generated the insolation matrixes for a multizone Building model. The Building model is distributed among 31 zones. Here below is attached a picture:

 

 

With this model, I’m able to create the view factor matrix, but whener starting to process the shading/ insolation matrix running detailed mode, TRNbuild automatically shuts down after some seconds processing.

I checked the “.shd” log file attached in the same folder and it does not contain any errors, it simply stops processing. Here below a picture of the end of the “.shd” file:

 

I’m also attaching the idf, b18 and shd in case it helps to solve the issue.

 

Kind regards,

 

Santiago Escudero.

 

IREC – Institut de Recerca en Energia de Catalunya