Gokula,
Could you please send me the project file and also tell me what
version of Trnsys you are using? I tried to duplicate the problem
and I can use a 7-digit number without any problems.
Thank you in advance,
David
Hello Trnsys Users
When I use a 7-digit number in an equation, the result is shown as zero in both the printer and the plotter. However, the impact of this equation has been noticed in the output of an integrator. The result is zero only when using a 7-digit number. Up to 6-digit number, it is working by showing the actual value in the printer and plotter. (equation solver mode =0)
When I change the equation solver mode from 0 to 2 in the advanced settings option. The 7-digit number works and it gets printed and plotted.
The equation is simple and it is given below.
Char_T1_M1_g = lt(F3,Fgg)*T1_at_M1*(2880000-B_in3)
F3, Fgg, T1_at_M1, and B_in3 are variables
Please help me to solve this!
Best Regards
Gokula
![]()
Disclaimer:This message (including any attachments) contains confidential information intended for a specific individual and purpose. If you are not the intended recipient, you should delete this message and notify the sender and The Hong Kong Polytechnic University (the University) immediately. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited and may be unlawful.
The University specifically denies any responsibility for the accuracy or quality of information obtained through University E-mail Facilities. Any views and opinions expressed are only those of the author(s) and do not necessarily represent those of the University and the University accepts no liability whatsoever for any losses or damages incurred or caused to any party as a result of the use of such information.
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 3 North Pinckney Street - suite 202 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com