Hello Trnsys Users
When I use a 7-digit number in an equation, the result is shown as zero in both the printer and the plotter. However, the impact of this equation has been noticed in the output of an integrator. The result is zero only when using a 7-digit number. Up to 6-digit number, it is working by showing the actual value in the printer and plotter. (equation solver mode =0)
When I change the equation solver mode from 0 to 2 in the advanced settings option. The 7-digit number works and it gets printed and plotted.
The equation is simple and it is given below.
Please help me to solve this!
Best Regards
Gokula
Disclaimer:
This message (including any attachments) contains confidential information intended for a specific individual and purpose. If you are not the intended recipient, you should delete this message and notify the sender and The Hong Kong Polytechnic University (the University) immediately. Any disclosure, copying, or distribution of this message, or the taking of any action based on it, is strictly prohibited and may be unlawful.
The University specifically denies any responsibility for the accuracy or quality of information obtained through University E-mail Facilities. Any views and opinions expressed are only those of the author(s) and do not necessarily represent those of the University and the University accepts no liability whatsoever for any losses or damages incurred or caused to any party as a result of the use of such information.