Emre,
In addition to Mario's comment, you might also look at your assumptions for the amount of infiltration in your greenhouse and the ground temperature underneath your greenhouse. Depending on how you created the Studio project (either using the import wizard or manually) you may not be accounting for any infiltration. Greenhouses typically have fairly high infiltration rates.
kind regards,
David
On 07/06/2019 07:43, Emre Arpaci via TRNSYS-users wrote:
hi to everyone.
i have trnsys 17 and i want to desing a basic closed greenhouse with trnsys.
i sketched my greenhouse with google skecth up. I made all walls and roofs in the form of glass.(because
I want to make every wall of the greenhouse that made of glass )
And I import my idf file to trnsys. And that is all i didnt add any ventilation.And a day in january of max temperature 7.5 degrees ,the greenhouse max. temperature is going to 38 celcius degree. is that normal ? why this is so high ?
where am I doing wrong and what else should I add to the greenhouse.
Actually i m new with trnsys. and I read some article about greenhouse some people are adding wind speed to greenhouse etc. İs there anyone to explain clearly how to desing greenhouse with trnys.
All messages are important to me .Thankskind regards
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 3 North Pinckney Street - suite 202 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com