|
Inviato da Posta per Windows 10 Da: chiara pinto via TRNSYS-users Hi everyone, i have some problems with type 9e. I want to make a comparison between two thermal powers, calculated using the same starting data (istantaneous values) but in different ways. One of the Thermal powers has been determineted on Excel and
then imported on trnsys (type 9e) and collegates with online plotter. For the other one, i have inserted a new equation on trnsys where both the inputs that the formula are the same as the previous case. Essentially the only differencech is the program that
i use to calculate each of them. But, when i run the simulation, i see that there are different values. How is this possible? Does anyone know what could be the problem? I use mode 2 for data Readers and i chose to interpolate the data. Could be this the problem?
Thanks a lot for the attention. Regards, Chiara Inviato da
Posta per Windows 10 |
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org