|
Dear all I hope that someone could help me. I’ve got TRNSYS 18 and I’m using for the first time TRNSYS 3D with sketch-up. I’ve got a case study with two thermal zone of different height (picture 1). The adjacent wall of zone 1 is higher than the same adjacent wall of zone 2. I tried
to put a line in the adjacent wall to divide the wall and put adjacent in the bottom and external in the top one, but sketch-up didn’t give me the possibility to define a type of trnsys wall (picture 2) in the two different part of the wall. Am I doing something
wrong or I cannot do it and I have to divide the zone 1 in two different zone (or eventually airnode)?
Because this is a simple work, but I would like to do another work and If I have to divide every zone when I have different border I have to separate the building in 108 thermal zones instead of 30 and this will slow and complicate a lot
the work. I hope that someone could help me. Thank you very much indeed Best regards Giulia |
Attachment:
picture1.PNG
Description: picture1.PNG
Attachment:
picture2.PNG
Description: picture2.PNG
