Arian,
There could be many reasons for this. For example, if you have heating and cooling enabled in your building so that the zone temperature is forced to always be between 20C and 21C then regardless of the timestep and whether or not you interpolate the weather file the building temperature is always going to be between 20 and 21C.
regards,
David
On 03/07/2017 11:34, Arian Bahrami via
TRNSYS-users wrote:
Dear Jeff
I am using TRNSYS 16. I only used Type 109-TMY2 and when I changed the time step to less than 1 hour, like min or s , the output result which is the indoor temperature of the building type 56 is the same as 1 hour even to the last digit.
Best Regards,
Arian
Sent from my iPhone
On 7 Mar 2017, at 6:19 pm, Jeff Thornton via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:
The TRNSYS weather components all have interpolation schemes built into the models for seamless simulations at time steps less than an hour.
Jeff / TESS
Sent from my iPhone
On Mar 7, 2017, at 9:55 AM, Amirreza Heidary via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:
DearArian
--------------------------------------------------------------------------------------------------------------------------------------------------
amirrezaheidarymaster student of energy systems EngineeringSharif university of technologyTehran-IranE-mail address:P Save a tree... Please don't print this E-mail unless you really need to.
On Tue, Mar 7, 2017 at 8:04 PM, Arian Bahrami via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:
Dear all,
I want to know whether TRNSYS has a default interpolating weather data component like EnergyPlus since most of the solar data is hourly and as I see, TRNSY can simulate in smaller time step such as min and s. So, Is there way to accomplished such a thing.
Best Regards,
Arian.
Sent from my iPhone
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users- onebuilding.org
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 22 North Carroll Street - suite 370 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com