Dear Jeff
I am using TRNSYS 16. I only used Type 109-TMY2 and when I changed the time step to less than 1 hour, like min or s , the output result which is the indoor temperature of the building type 56 is the same as 1 hour even to the last digit.
Best Regards,
Arian
Sent from my iPhone
Sent from my iPhone
On 7 Mar 2017, at 6:19 pm, Jeff Thornton via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:
The TRNSYS weather components all have interpolation schemes built into the models for seamless simulations at time steps less than an hour.Jeff / TESS
Sent from my iPhone
On Mar 7, 2017, at 9:55 AM, Amirreza Heidary via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:DearArian--------------------------------------------------------------------------------------------------------------------------------------------------amirrezaheidarymaster student of energy systems EngineeringSharif university of technologyTehran-IranE-mail address:P Save a tree... Please don't print this E-mail unless you really need to.On Tue, Mar 7, 2017 at 8:04 PM, Arian Bahrami via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:Dear all,
I want to know whether TRNSYS has a default interpolating weather data component like EnergyPlus since most of the solar data is hourly and as I see, TRNSY can simulate in smaller time step such as min and s. So, Is there way to accomplished such a thing.
Best Regards,
Arian.
Sent from my iPhone
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users- onebuilding.org
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org