[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Re : Shading masks problem Type 64 or 67

Hi Adrien,

Thank you very much, the problem was simply the component order... Sorry for inconvenience!

With kind regards,

Julien

Dr.-Ing. Julien CARTON
Gérant
 
SARL ICSEED
Ingénierie-Conseil pour des Solutions Energétiques et Ecologiques Durables
CAREP 3 – 57, Sq. Herzog
54390 FROUARD
Tél : +33.6.61.48.46.19
Email : julien.carton@icseed.com
Web : www.icseed.com
 
Le 25/11/2016 à 09:52, Adrien JEZEQUEL a écrit :
Hi Julien

You may check if connections between weather data component and type 64 ou 67 is correct and in adequation with your text file, specialy regarding the shading orientation you define in text file.
You may also check if your component order is correct:
1) Weather Data with radiation calculation
2) Shading Mask
3) Building

Best regards
Adrien




Le jeu. j nov. PM à 23:01, Julien Carton - ICSEED via TRNSYS-users

Hi everybody,

Normally I am using Trnsys 3D for shading masks definition, but I have to show in a TRNSYS training how to use Shading mask processors Type 64 or 67. I thought that I would handle that easily but it seems that not^^

Since I'm connecting the shading mask to a building (for beam and total radiation on a facade), I am getting troubles in the calculation of radiation inside the building. The simulation is stopping after x warnings.

I might have made an error in links definition but I think I did it right. What I can see is that the shading mask has an effect on shaded total radiation but no effect at all on beam radiation. This is quite surprising...



Does anybody have an idea?
Many thanks in advance for your answers,

Julien
--
Dr.-Ing. Julien CARTON
Gérant
 
SARL ICSEED
Ingénierie-Conseil pour des Solutions Energétiques et Ecologiques Durables
CAREP 3 – 57, Sq. Herzog
54390 FROUARD
Tél : +33.6.61.48.46.19
Email : julien.carton@icseed.com
Web : www.icseed.com