Rodrigo,
No, you don't. Type56 automatically gets that information from
the weather file that is providing the ambient temperature and RH
to the building model. You can still connect those items manually
if you want to. In order to do so, you need to go into TRNBuild
and change the "calculation mode" setting for any orientation that
you want to set up manually.
kind regards,
David
On 08/30/2016 15:32, Rodrigo Mora via
TRNSYS-users wrote:
Hello,
When the 3D geometry is imported from
Sketchup or CONTAM do I still need to manually couple each
external surface with the corresponding total and beam solar
radiation and the incidence angle from the weather file?
Thanks,
Rodrigo
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com