[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] weather file coupling with surfaces

Dear Rodrigo,

 

if you use SketchUp and import the idf file using Simulation Studio 3d building Wizard, external surfaces are automatically being recognized and connected to the correct solar radiation by using TRNBuilds internal calculation of orientations.

 

Best
Jakob

 

_________________________________________________________________________________________________

 

Jakob Merk

TRNSYS Software Team


Transsolar Energietechnik GmbH

Curiestraße 2

70563 Stuttgart

Fax:        +49 711 67976-11
Email:    hotline@transsolar.com

Web:      www.trnsys.de

 

 

 

Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] Im Auftrag von Rodrigo Mora via TRNSYS-users
Gesendet: 30 August 2016 22:33
An: trnsys-users@lists.onebuilding.org
Betreff: [TRNSYS-users] weather file coupling with surfaces

 

Hello,

 

When the 3D geometry is imported from Sketchup or CONTAM do I still need to manually couple each external surface with the corresponding total and beam solar radiation and the incidence angle from the weather file?

 

Thanks,

Rodrigo