|
Christian,
Could you please send me the edited *.dck file that is the
basis for the parametric runs (I guess it would be called test.dck
while test1.dck, test2.dck etc. are all generated by TRNEdit).
Also could you please tell me which version of TRNSYS you are
running. You can tell the version number by looking in either the
*.log or *.lst file that is generated when you run a dck. The
*.log and *.lst can be opened with a text editor.
kind regards,
David
On 05/31/2016 02:32, Christian Herløv
Krintel via TRNSYS-users wrote:
Nordine,
Thank you. It was a simple typo, it should say "201". I already
made sure, that the logical unit is not in use.
The error message:
*** Fatal Error at time : 0.000000
Generated by Unit : Not applicable or not available
Generated by Type : Not applicable or not available
TRNSYS Message 141 : The utility subroutine DATA cannot
read the specified input data file. Make sure that the file is
ASSIGNed correctly and that the file has the correct format
Reported information : ASSIGNED LOGICAL UNIT 200
Here it looks like it tries to read in logical unit 200, which
does not exist. This is the line in the .dck file:
PAR_LU_CLIMATE=2.0100E+02
... which is used as the 2nd parameter of Type15 Weather reader.
Best Regards
Christian Krintel
Nordine Belaissaoui skrev den 2016-05-30 21:49:
Hi,
In your example you're talking of 201 and 210. Those are 2
different
logical units.
Can you first make sure of your example in your email. It may
just be
a misunderstanding in your email.
Then, I think your issue is caused by an other logical unit in
the
same file.
You must make sure that there is no other 201 (210) logical unit
used
in that .dck.
I personally started my own logical unit from 39000 and it works
fine.
On Monday, 30 May 2016, Christian Herløv Krintel
<trnsys-users@lists.onebuilding.org> wrote:
Dear all,
I have a parametric table with a list of logical units, which
I use
to choose different weather files for my simulation.
Some of the runs are omitted due to errors. It seems that
these
errors are caused by the number formatting.
For instance when opening the first .dck file, e.g. TEST1.dck,
it
says something like
ASSIGN "Weather\file.tm2" 2.0100E+02
Even though I just put "210" in the parametric table. The
error
disappears when I change the number into "210" and run the
.dck file
again.
How can I circumvent this propblem?
Thank you
Best regards
Christian Krintel
Technical University of Denmark
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
Nordine Belaissaoui
--
DualSun - Product Manager, M.Sc Energy Engineering
Phone : +33 4 13 41 53 71
Email : nordine.belaissaoui@dualsun.fr
Address : Pôle de l'Etoile - 38 rue Frédéric Joliot Curie - F
13451
Marseille Cedex 13
www.dualsun.fr [1] | Page Facebook | Fil Twitter | Profil
LinkedIn |
Page Google+
Links:
------
[1] http://www.dualsun.fr
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
|