[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Using the ASSIGN statement
Christian,
There are some components that internally assign a logical unit number
but really not that many so I am surprised that one of the ones you
chose did not work. Could you please send your project and any other
files needed in order to run the simulation to me directly so that I can
take a look at the problem?
kind regards,
David
On 04/14/2016 01:47, Christian Herløv Krintel wrote:
Dear TRNSYS users,
I am trying to use the ASSIGN statement to assign a weather file to a
logical unit. I write in the control cards:
ASSIGN .\Weather\US-TMY2\US-AK-Anchorage-26451.tm2 99
But when I run the simulation I get the following error message: "An
ASSIGNED logical unit is already in use, either by the TRNSYS kernel
or by a Type". I tried to use different logical units, all with the
same error message. I made sure that the logical units I assign to are
not in use by other components by checking the .dck file beforehand.
I hope someone can help me solve this problem.
Best regards
Christian
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com