Re: [TRNSYS-users] Underfloor heating three storey building

[David BRADLEY <d.bradley@tess-inc.com>]

Igor,
  without knowing what kind of warnings you are getting it isn't really possible to guess what might be going on. If you are not able to interpret the warnings then I would recommend that you send the project and supporting files on to your distributor for assistance.
kind regards,
 David

On 3/24/2015 4:27 PM, Igor Seso wrote:

Hi,

I'm modelling underfloor heating system. The building has three floors, but it has underfloor heating only on the first two floors and the third is unheated. I made the active layers and in the first zone I have ground floor-boundary(with the active layer), on the second floor I made the  ground floor(with active layer) adjacent to the first floor zone and on the third floor I made ground floor(without active layer)   adjacent to the second floor zone , the roof as external surface. (All of the walls are made as external surfaces)

First I tried just to get the required heating energy for the zones but I get warnings - when I remove the active layers then is possible to calculate the required heating energy.

 Did I made some mistake with the adjacent zones or could be something else, any idea?

Best Regards

Igor 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com