Dear all,
I tried to model two zones(each room
is a zone, i.e. two rooms) with each has a fan coil in it
in a building, while other rooms(zones) have no
conditioning system. The air conditioning system is
outside of the building, i.e. I set cooling “off” in
Trnbuild.
1.How do I know that the
first fan coil is assigned to zone1( room1)? While the
second fan coil conditioned for zone2 (room2) not for
other zones?
2. In fact, I still can
not figure out how the fan coil is link with Type 56,
although it is very common in HVAC system. Am I right for
the following setting?
I named inputs in type56
like “Q_cooling_1” “Q_heating_1, “Q_cooling_2”
“Q_heating_2 respectively. I wish that the first fan coil
’s output “air-side heat transfer” link with room1’s
“Q_cooling_1” “Q_heating_1, while the second fan coil ‘s
output” “air-side heat transfer” link with the
“Q_cooling_2” “Q_heating_2.
Thank you for your time
and patience.
Yours sincerely
Wu weiwei