Dear all,
I tried to model two zones(each room is a zone, i.e. two rooms) with each has a fan coil in it in a building, while other rooms(zones) have no conditioning system. The air conditioning system is outside of the building, i.e. I set cooling ¡°off¡± in Trnbuild.
1.How do I know that the first fan coil is assigned to zone1( room1)? While the second fan coil conditioned for zone2 (room2) not for other zones?
2. In fact, I still can not figure out how the fan coil is link with Type 56, although it is very common in HVAC system. Am I right for the following setting?
I named inputs in type56 like ¡°Q_cooling_1¡± ¡°Q_heating_1, ¡°Q_cooling_2¡± ¡°Q_heating_2 respectively. I wish that the first fan coil ¡¯s output ¡°air-side heat transfer¡± link with room1¡¯s ¡°Q_cooling_1¡± ¡°Q_heating_1, while the second fan coil ¡®s output¡± ¡°air-side heat transfer¡± link with the ¡°Q_cooling_2¡± ¡°Q_heating_2.
Thank you for your time and patience.
Yours sincerely
Wu weiwei