[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Type 52
Jean,
Do you have a relatively simple project that exhibits the problem? It
would be helpful in debugging the Type.
Best,
David
On 11/6/2012 07:45, Jean Marais wrote:
When no air (or very little) passes through the coil (type 52b), the
outlet air temp becomes that of the coil water. I have a problem that
the type is internally calling a routine for the wet-bulb calculation
which is outside of range (Temp more than 70 degC). This error is
TERMINATING my simulation although I only get it once. I also get a
saturation warning everytime condensation occurs on the coil when I
use it as a cooling coil. I have been advised to recompile this type
with some adjustments, but I have no resources to do so. Please advise.
Jean Marais
TRNSYS Message 114 : The utility routine PSYCHROMETRICS, which
calculates the thermodynamic properties of moist air, has been called
with a wet bulb temperature above the maximum wet bulb temperature for
the given pressure. Please check the routine which calls the
PSYCHROMETRICS routine for possible sources of errors. Reported
information : Error 114
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com