[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Type997 - Outputs

To: trnsys-users@cae.wisc.edu
Subject: Re: [TRNSYS-users] Type997 - Outputs
From: "Igor Grujic" <igor.g@gmx.at>
Date: Mon, 31 Oct 2011 11:02:18 +0100
In-reply-to: <1319574224.v2.mailanyonewebmail-331886@fuseweb2f.electric.net>
List-archive: <http://mailman.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>
List-post: <mailto:trnsys-users@cae.wisc.edu>
List-subscribe: <https://mailman.cae.wisc.edu/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>
List-unsubscribe: <https://mailman.cae.wisc.edu/options/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>
References: <1319574224.v2.mailanyonewebmail-331886@fuseweb2f.electric.net>

Dear Matt,

I had read the description of those outputs already, but I didn’t understand why those are not equal?
The loss energy between the input and output flow should be the same as the rate at which energy is transferred from the fluid to the soil, right? The Values are actually lightly different.
Does TRNSYS consider the energy loss for example for the pipe deformation or similar?

Thanks in advance

Best regards,
Igor


-- 
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie!		
Jetzt informieren: http://www.gmx.net/de/go/freephone

References:
- Re: [TRNSYS-users] Type997 - Outputs
  - From: "Matt Duffy" <duffy@tess-inc.com>

Prev by Date: [TRNSYS-users] Information
Next by Date: Re: [TRNSYS-users] Wind Speed and Direction
Previous by thread: Re: [TRNSYS-users] Type997 - Outputs
Next by thread: Re: [TRNSYS-users] Type997 - Outputs
Index(es):
- Date
- Thread