[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Type 534
Alessia,
Since Type534 can have a lot of different configurations, it is not
possible to know the cause of the problem without seeing the *.tpf file
(to know what input 6 is in this case). If input 6 is a flow rate, then
chances are that the error is because input 6 is going negative. It may
be helpful to you to start with one of the examples of using Type534
with an internal heat exchanger, verify that it runs, then copy the tank
model from the example project into your project. Get the external file
reference set up correctly then being changing the tank from the example
configuration to your desired configuration one step at a time. The
examples are located in:
..\Trnsys17\Tess Models\Examples\Storage Tank Library\
Kind regards,
David
On 7/1/2011 11:55, aartecon@mta01.univpm.it wrote:
I'm using the storage tank Type 534 with a coil heat exchanger inside.
I'm experiencing a lot of troubles to make it work properly.
I got this error message, but it doesn't seem that the problem is the
input suggested.
"The TRNSYS TYPE checking routine has found an inconsistency in the
specified component between the input file and the information expected by
the Type
Reported information : An illegal INPUT value has been reported by
the model. The model has reported that Input 6 is the problem - but
this may not be the case. Please check the component configuration.
The *.lst file may contain additional information."
Do you have any idea of what can cause the problem?
Thanks in advance.
Alessia
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley@tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com