[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Error type message 411 with tank type 534

Dear Antoine,

This should work unless the two external files of Type534 are referencing the same file, so please make sure that is not the case.

Best regards

Matt Duffy
Thermal Energy Systems Specialists


Sent from my mobile wireless device. Please excuse any typos.

On Apr 6, 2011, at 9:46 AM, ANTOINE FREIN <antoine.frein@gmail.com> wrote:

Dear all,



I am using TRNSYS Version 16.01.0003 with TESS libs 2.0 with the simulation studio. I have a complex deck with two tanks type 4a and one tank type 534 (from the TESS library). My simulation is giving correct results but when I want to add a fourth tank type 534 an error appears, see below the error from the list file:




*** Fatal Error at
    time   :      1000.020000
    Generated by Unit     :  166


    Generated by Type     :  534

    TRNSYS Message  411 : The getStorageVars subroutine was
called with an array size greater than that requested from the call by setStorageSize routine. Only the variables located at and below the limit requested by setStorageSize will be retrieved for this simulation. Please check the formulation of the specified TYPE, rebuild the dynamic link library and re-run the simulation


    Reported information  : Not available


In this case start time is 1000 with a time step of 0.02


The two tanks type 534 are using different external files and they have different characteristics and each of them is running correctly in an empty TRNSYS project:


-        The old one has one port and two immersed heat exchangers


-        The second one has three ports and zero immersed heat exchanger



Did anybody come along the same problem and knows advice?


Thanks for any help


Antoine Frein
Politecnico di Milano


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users