Re: [TRNSYS-users] Problem in make a link between data file and new

["Matt Duffy" <duffy@tess-inc.com>]

Dear Mehdi,

It looks like you did indeed associate the logical unit number with the
file in the *.tmf proforma. However, I believe that the logical unit
number can only be from 0 to 999. Some of the other standard TRNSYS
components range the LU number from 10 to 30 with a default of 23 or so.
Off of the top of my head, I am not sure if this will make a difference or
not, but it is something to try if it does not work.


Best regards,

Matt Duffy

----- Original Message -----
From: "Mehdi Shahrestani" <mahdishahrestani@yahoo.com>
Sent: Fri, September 10, 2010 13:16
Subject:Re: [TRNSYS-users] Problem in make a link between data file and new


Dear Jeff Thornton

Many thanks for your swift reply.
Unfortunately, I did your recommended instruction but still the logic unit
is not highlighted.
As attached the "tmf" file is attached.
I was wondering if you could give me your advice to tackle it.

Many thanks for your time
Regards
Mehdi


-----Original Message-----
From: Jeff Thornton [mailto:thornton@tess-inc.com]
Sent: 10 September 2010 04:00
To: Mehdi Shahrestani; trnsys-users@cae.wisc.edu
Subject: Re: [TRNSYS-users] Problem in make a link between data file and
newcomponent

<The data file is linked into the new component and the response is
quite well. But, the problem is in performa, the line related to logic
unit (parameter for link data file and the component) is not highlighted
and is not getting number automatically. Where as in standard components
of Trnsys the logic unit line is highlighted and the number is
automatically assigned.>

When the proforma was created, the user did not associate the logical unit
parameter with the external file.  Open the proforma in edit mode, go to
the 'file' tab and choose the correct parameter in the 'parameter' drop
down box.  Save the proforma and then use the edit/replace feature in your
project to get the new version into your project.

Jeff


Jeff Thornton
President - TESS, LLC

22 North Carroll Street - Suite 370
Madison WI 53703 USA

Phone: 608-274-2577
Fax: 608-278-1475
E-mail: thornton@tess-inc.com
Web: www.tess-inc.com
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users


----- End of original message -----