[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[TRNSYS-users] Unusually slow run time

To: "trnsys-users@cae.wisc.edu" <trnsys-users@cae.wisc.edu>
Subject: [TRNSYS-users] Unusually slow run time
From: Fred Betz <fbetz@aeieng.com>
Date: Thu, 1 Apr 2010 09:46:06 -0500
Accept-language: en-US
Acceptlanguage: en-US
List-archive: <https://www-old.cae.wisc.edu/pipermail/trnsys-users>
List-help: <mailto:trnsys-users-request@cae.wisc.edu?subject=help>
List-id: "TRNSYS users mailing list at the Solar Energy Lab, UW-Madison" <trnsys-users.cae.wisc.edu>
List-post: <mailto:trnsys-users@cae.wisc.edu>
List-subscribe: <https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=subscribe>
List-unsubscribe: <https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users>, <mailto:trnsys-users-request@cae.wisc.edu?subject=unsubscribe>
Thread-index: AcrRqg9embS4FoXPQW6QOUD5enDBQA==
Thread-topic: Unusually slow run time

I have a simulation that runs the first 200 hours very quickly and then essentially freezes.

If I allow it to continue to run it calculates the next time step in approximately 60 seconds to 5 minutes.

Anyone have any thoughts on why the calculations of each time step are so inconsistent and how to remedy this?

Thanks,

Fred

Fred Betz PhD., LEED AP
Sustainable Systems Analyst

AEI | AFFILIATED ENGINEERS, INC.
5802 Research Park Blvd. | Madison, WI 53719

P: 608.236.1175 | F: 608.238.2614
fbetz@aeieng.com | www.aeieng.com

Follow-Ups:
- Re: [TRNSYS-users] Unusually slow run time
  - From: "Julian Röder" <Julian.Roeder@ruhr-uni-bochum.de>
- Re: [TRNSYS-users] Unusually slow run time
  - From: Michaël Kummert <michael.kummert@gmail.com>

Prev by Date: Re: [TRNSYS-users] Using LCC
Next by Date: Re: [TRNSYS-users] Unusually slow run time
Previous by thread: [TRNSYS-users] Using LCC
Next by thread: Re: [TRNSYS-users] Unusually slow run time
Index(es):
- Date
- Thread