[TRNSYS-users] Doubt regarding internal connection

[ARCHIT MAHAWAR 19BME0489 <archit.mahawar2019@vitstudent.ac.in>]

Sir we are struggling with the internal connections of our hot water system. We did the same connections in the evacuated tube collector as we did with flate plate collector. Our flat plate system simulation is working fine but we are facing errors while doing same connections with evacuated tube one. I am attaching the images of the systems and the errors faced. The 1st image is the system with flate plate collector and 2nd with evacuated tube collector. 

Disclaimer:
This message was sent from Vellore Institute of Technology.  The contents of this email may contain legally protected confidential or privileged information of “Vellore Institute of Technology”.  If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. If you have received this email in error, please promptly notify the sender by reply email and delete the original email and any backup copies without reading them.

Attachment: 20230417_171702.jpg
Description: JPEG image

Attachment: 20230417_171850.jpg
Description: JPEG image

Attachment: 20230417_171736.jpg
Description: JPEG image

Attachment: 20230417_171907.jpg
Description: JPEG image

Attachment: 20230417_164133.jpg
Description: JPEG image