[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Solar Cap (Type34)



In Simulation Studio, you can use the option of the Building Project (Multizone) wizard to create a project with Solar Caps by checking 
the 'Active' checkbox in step 8:




Werner



On Wed, Jan 18, 2023 at 4:13 PM ANTONIO Manuel via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:
Greetings,

I am doing a project, and I would really appreciate your help to answer the questions below, concerning the application of a solar cap (Type34). I don't know how to make the connection with the trnbuild, could you please help me? Thanks

Next, the impact of a cap over the large bay of the dining room (long side only) is to be demonstrated.
We will use an architectural cap (= "overhang", type34 in "loads and structures") above the south window. It extends 10 cm beyond the window on both sides. It is located at a distance of 30 cm from the top of the bay. The cap is 100 cm deep.

Questions :
Plot on the same figure the radiation received by the bay in the case with a canopy and in the case without a canopy.)  
Plot on the same figure the evolution of the outside temperature and the temperature of the dining room with and without a canopy.
image.png

image.png
image.png


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org