Hi Maja,
could you send us the IDF file?
CAS
Kursmodul Energiespeicher (4 Tage) an der OST – Rapperswil:
Alles was Sie zu thermischen, elektrischen, chemischen und mechanischen Energiespeichern wissen müssen:
Do. 12.05. / Fr. 13.05. / Do. 19.05. / Fr. 20.05.
Weitere Informationen finden Sie
hier; zur Anmeldung geht es
hier
Toni Calabrese, MSc.
Wissenschaftlicher Projektleiter
toni.calabrese@spf.ch |
toni.calabrese@ost.ch
T +41 58 257 4827
SPF Institut für Solartechnik
OST – Ostschweizer Fachhochschule
Oberseestr. 10 | CH-8640 Rapperswil | Switzerland |
www.spf.ch
| www.ost.ch
From: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org>
On Behalf Of Maja Danovska via TRNSYS-users
Sent: Wednesday, March 30, 2022 2:51 PM
To: trnsys-users@lists.onebuilding.org
Cc: Maja Danovska <maja.danovska@unitn.it>
Subject: [TRNSYS-users] Error in reference area - TRNBuild
Dear Users,
I am struggling with TRNSYS3D. I created a geometry where each surface was defined as a wall, ceiling, roof and so on. Once I imported the idf into TRNBuild, I got a reference floor area for each thermal zone equal to 1, and consequently
errors in the volume as well. The geometry is quite complex, meaning that I cannot calculate the volume by myself easily.
Do you know why I get this error?
Thanks a lot in advance.
Kind regards
--
Maja Danovska
Research Fellow
Dep. of Civil, Environmental and Mechanical Engineering
University of Trento
via Mesiano, 77 - 38123 - Trento - ITALY
+393403391289
