Hello, I am using the alkaline water electrolyzer, Type 160, with the following specifications: - electrolyzer current (calculated from the difference of production and demand of my PV-System, if positive): abs(Power_W)/abs((gt(V_EL,0.5)*(V_EL))+((1-gt(V_EL,0.5))*1)) - cooling water inlet temperature (temperature of my heat grid, range from -7°C to 48 °C) - cooling water inlet flow rate (from pump, Type 110, 50 kg/h) The problem is that the electrolyzer generates too much heat (output heat generated + heat of cooling water outlet temperature), the thermal flosses are not in balance. Please see the attached flowchart (Energy in MWh) Thanks in advance for any help. Regards Moritz, MSc. Student in renewable energy systems.
<<attachment: winmail.dat>>