Re: [TRNSYS-users] Cooling Loads

[David BRADLEY <d.bradley@tess-inc.com>]

It isn't really possible to tell from screen captures what the cause of the problem might be. One thing to check is the assumption that you have made about the ground temperature. If you have a ground floor in your building and you leave the default value of TGROUND as 0C then you get a lot of unrealistic free cooling from a constantly cold ground. If that is not the cause of the problem I would suggest contacting your distributor. While Trnsys17 is no longer officially supported your distributor may have the capacity to take a look at the project for you.

kind regards,

 David

On 01/24/2022 14:38, Orib Zayed via TRNSYS-users wrote:

Greeting,

First, I tried to calculate the cooling loads for four floors, but I failed to control the set point temperature. Use Trnsys 17. But I succeeded in controlling the heating set point temperature, calculating its loads.

Can anyone help me.

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

-- 
***************************
David BRADLEY
Principal
Thermal Energy System Specialists, LLC
3 North Pinckney Street - suite 202
Madison, WI  53703 USA

P:+1.608.274.2577
d.bradley@tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com