Hello everyone,
I'm simulating a thermal active layer installed in the vertical external wall of a building using Type 399 connected to Type 56
As a first step, I connect Type 399 only to one facade by considering that the active layer occupied only 4 m² of the wall while the total area of this wall is 48 m²
I include in the TRNBuild file of the building a new layer "HIGH_RESISTANCE" that have the same area of the portion of the facade where the active layer is installed (4 m²) in which
I define the energy gain on side 1 and side 2 that come (outputs) from Type 399
The wall have 6 layers and the active layer is in layer no 4 and i use 4 discretization for each layer and the total mass flow is 60 kg/hr
when i run the simulation, I get this error:
Specific massflow -use more segments- see type description
I look in the description of Type 399, I didn't find nothing about the massflow and its relation with the discretization
does anyone have some ideas about this?
Thank you
Kind regards
Hassan
Hassan Mahach
Durchwahl: -23
E-Mail:
mahach@izes.de
IZES gGmbH
Altenkesseler Str. 17, Geb. A1
D-66115 Saarbrücken
Tel.: +49 681 844972-0
Fax: +49 681 7617999
Aufsichtsratsvorsitzende: Ministerin Anke Rehlinger
Wissenschaftlicher Geschäftsführer: Prof. Frank Baur
Kaufmännische Geschäftsführer: Dr. Lesya Matiyuk, Dr. Michael Brand
Administrativer Geschäftsführer: Friedrich Simson
Amtsgericht Saarbrücken: HRB 8499
Web:
http://www.izes.de
