[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Question about selecting boundary temperatures in TRNBUILD



Hi Amin,

 

the main difference is that for “Identical” the same absorbed solar radiation and longwave radiation gains are imposed on the back side of the surfaces in addition to convective heat transfere.
“Userdefined” doesn’t include any radiation gain. Only a heat transfer from the surface node defined by the “convective heat transfer coefficient” of the back sides of the surface and the given temperature is calculated.

More detailed information is given int eh Type56 manual.

 

Regards,

 

Marion

 

Transsolar Software Team

hotline@transsolar.com

 

Transsolar

Stuttgart | Munich | Paris | New York

 

Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany

CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

 

 

Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> Im Auftrag von Amin HADDAD via TRNSYS-users
Gesendet: Mittwoch, 16. Juni 2021 13:50
An: TRNSYS users mailing list at OneBuilding.org <TRNSYS-users@lists.onebuilding.org>
Cc: Amin HADDAD <itshaddad1@gmail.com>
Betreff: [TRNSYS-users] Question about selecting boundary temperatures in TRNBUILD

 

Hi dear users,

 

I would like to know, when selecting a boundary wall, how TRNBUILD (Type 56) will assume or calculate the temperature boundary condition when choosing the option "Identical" instead of selecting ''Userdefined'' ?

 

Thank you for helping

 

Regards

 

Amin