|
Hi Yorgos,
the log file shows that the listed daylight sensors are defined in the zone, so that part works. After that, there has to be an error, because the following line "
Note: Geometry Rotation of ..." is not created.
It's hard to tell what the problem is without any more info about the project.
If you send the building project file
(*.b18) incl. your TRNSYS user ID number to your TRNSYS distributor, they should be able to help you.
Best,
Christina
Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> im Auftrag von Yorgos Spanodimitriou via TRNSYS-users <trnsys-users@lists.onebuilding.org>
Gesendet: Montag, 23. November 2020 15:42 An: trnsys-users@lists.onebuilding.org <trnsys-users@lists.onebuilding.org> Cc: Yorgos Spanodimitriou <yorgos.spanodimitriou@unicampania.it> Betreff: [TRNSYS-users] Problem generating Radiance files in TRNSYS 18 Dear TRNsys users,
I would like to incorporate daylight simulations in my TRNSYS 18 model (vers. 18.01.0000) through Radiance, but I’m unable to generate the required files through the trnRAD utility. The log output is: trnRAD Version: 1.25 Note: Found daylight sensor ID 5 in Zone GEMINI1 Note: Found daylight sensor ID 6 in Zone GEMINI1 Note: Found daylight sensor ID 7 in Zone GEMINI1 Note: Found daylight sensor ID 8 in Zone GEMINI1 So, it seems to be unable to generate all the files listed in the manual. I’ve followed all the steps highlighted in the manual, and, for example, I’m able to generate the correct Radiance files for the example trnsys model, but not so for my model. Could you please give me a hint on where to look for the error? _______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org |