Dr Bina,
If you have access to the TESS Applications Library, you can define such schedules using the Types in that library. In TRNBuild you will need to select that the schedule values will come from INPUTS instead of from SCHEDULES that are defined inside TRNBuild.
best,
David
Hello dear TRNSYS users;
I have a question regarding the schedule for heating and cooling:Firstly, I want to calculate the heating and cooling loads using the energy balance method (just on the heating the cooling buttons) based on the following time table:For weekdays from 8 to 18 (either cooling or heating);For the weekends off (either cooling or heating);From Nov. to April "Heating";From Jul. to Sep. "Cooling".Secondly, I would like to use this schedule and also thermostat (either schedule or zone temperature is 1 for heating or cooling) to command the airconditioning system that I will add later.
And another issue, which is not important now, on weekdays later I want to use complex timing (8 to 18 full occupancy and other hours ratio of office workers).
Best Regards
Saeid Mohammadzadeh Bina, Dr. (Eng.)-------------------------------------------------Akita University
Graduate school of International Resource Sciences.
1-1 Tegata gakuen-machi, Akita 010-8502, JapanTel: +815068665026 (Japan)+989141011757 (Iran)E-mail: d9515254@s.akita-u.ac.jp-------------------------------------------------
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 3 North Pinckney Street - suite 202 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley@tess-inc.com http://www.tess-inc.com http://www.trnsys.com