Re: [TRNSYS-users] About Cooling Load

[Jeff Thornton <thornton@tess-inc.com>]

If you add up column D and column E you get column B.  So the energy isn’t changing - it’s likely just the way you are calculating your answers....

Jeff

Sent from my iPhone

On Aug 7, 2020, at 8:27 AM, MEHMOOD Sajid via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:



Hi All,

I am trying to calculate total energy consumption of building. First, i turn cooling on only (with design conditons i.e. temperature 24 celcius and humdidity 0.012 kg/kg) and i got result as shown in column B (attached figure). this makes sense. But when i turn both heating (design temperature 20 celcius, humdity did not consider) and cooling (temperature 24 celcius and humdidity 0.012 kg/kg). i got result as shown in Column D and E. Column E makes sense. But my question is, why cooling load for few months (highlighted with yellow) have changed???? thanks

<image.png>

The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336. _______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org