[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] About Cooling Load

Sajid -

It looks like column D is Qsens which is the total sensible load for the zone.  What you want is Qcool which is just the cooling load for the zone.

Regards,

Tim

 

---
Timothy P. McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
3 N Pinckney St, Suite 202
Madison, WI 53703
office: 608-274-2577
cell: 608-225-5250

On 2020-08-07 05:20, MEHMOOD Sajid via TRNSYS-users wrote:

Hi All,
I am trying to calculate total energy consumption of building. First, i turn cooling on only (with design conditons i.e. temperature 24 celcius and humdidity 0.012 kg/kg) and i got result as shown in column B (attached figure). this makes sense. But when i turn both heating (design temperature 20 celcius, humdity did not consider) and cooling (temperature 24 celcius and humdidity 0.012 kg/kg). i got result as shown in Column D and E. Column E makes sense. But my question is, why cooling load for few months (highlighted with yellow) have changed???? thanks

The University of Edinburgh is a charitable body, registered in Scotland, with registration number SC005336.
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org