Thank you very much Jeff,
Now I can open the .txt. – file. But what can I do about the issue with the period of the Simulation. I change the period in the setting (Simulation start and stop time), the Simulation runs with the changed settings but the external file does not change the period of the Simulation. What can I do?
Best regards,
Alexander Schneider
Alexander,
That error simply means that you haven't told the computer what to do with a file with a .OUT extension. Change the file name to a .txt file and it should open automatically in Notepad. If you change it to .xls you might even get it to open automatically into Excel.
jeff
---
Jeff Thornton
President - TESS LLC
3 N. Pinckney Street, Suite 202, Madison WI USA 53703
Office: (608) 274-2577 Fax: (608) 278-1475
www.tess-inc.com
E-Mail: thornton@tess-inc.com
On 04/14/2020 6:50 pm, Alexander Schneider via TRNSYS-users wrote:
Dear TRNSYS community,
I have a problem in TRNSYS I can’t solve. Everytime I try to print an external file (using type 46a) with the results. I recieve a message that Windows did not succeded to open the .out – file.
You can find the discription of my ptoblem attached in this email.
The Problem is, I want to get my results for the PMV in this external file but they do not change (for example when I define the period for the Simulation). I had a period in 168 hr and I changed to 30 hr in the settings, the Simulation runs normally (with 30 hr) but the external file does not change the period. What can I do? I hope someone can help me.
Best regards
Alexander Schneider
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org