[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] TRNSYS time equation



Dear Marion Hiller , 
 i checked Type 14 output will not work in this situation. 
Actually i want to control natural ventilation window open and close according to the set point, at the corresponding time span. As i write before  temperature is room temperature, on behalf of that window should be open and close. if room temperature is high than the set value at particular time span window should open (natural ventilation). 

00 to 5h.... temp set point 18 C
5-10h....  temperature set point 22  C
10-18h....23  C
18 -24h...24  C

Thanks

On Thu, Mar 26, 2020 at 4:58 PM Marion Hiller via TRNSYS-users <trnsys-users@lists.onebuilding.org> wrote:

Hello Adnan,

 

I recommend to use Type 14 instead of an equation .

 

Marion

 

Marion Hiller

hiller@transsolar.com

 

Transsolar SoftwareEngineering

Stuttgart | Munich | Paris | New York

 

Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany

CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle

Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639

 

Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org> Im Auftrag von adnan rasheed via TRNSYS-users
Gesendet: Donnerstag, 26. März 2020 08:26
An: TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>
Cc: adnan rasheed <adnan.upm.spain@gmail.com>
Betreff: [TRNSYS-users] TRNSYS time equation

 


Hello everyone,

 

i want to use an equation for two control parameters time and temperature . like my control is  

 

00 to 5h.... temp set point 18 C

5-10h....  temperature set point 22  C

10-18h....23  C

18 -24h...24  C

 i need to get output as 0 or 1,  i am already using the following equation which is only allowing me to set one temperature set point, i need to set different temperature set points during complete one day.

 

GT(Temp,20)

 

how i can add time function with this equation

 

Thanks 

 

--

Adnan Rasheed

Post-doc Research Fellow

Kyungpook National University

Daegu, South Korea.

+82-102762-0105

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org


--
Adnan Rasheed
Post-doc Research Fellow
Kyungpook National University
Daegu, South Korea.
+82-102762-0105