Dear Wirich Freppel,
the call is pretty simple, since the b18 file is the only argument needed:
c:\TRNSYS18\Building\trnRAD\trnRAD.exe c:\TRNSYS18\Examples\3D_Building\6_Step_Add_Daylight\Building_step6.b18
All parameters for the file generation are included in the “PROPERTIES” section of the b18 file :
*--------------------------------------------------------------------------------
* P r o p e r t i e s
*--------------------------------------------------------------------------------
PROPERTIES
DENSITY=1.204 : CAPACITY=1.012 : PRESSURE=101325.000 : HVAPOR=2454.0 : SIGMA=2.041e-007 : RTEMP=293.15
*--- convective heat transfer coefficient calculation ---------------------
KFLOORUP=7.2 : EFLOORUP=0.31 : KFLOORDOWN=3.888 : EFLOORDOWN=0.31
KCEILUP=7.2 : ECEILUP=0.31 : KCEILDOWN=3.888 : ECEILDOWN=0.31
KVERTICAL=5.76 : EVERTICAL=0.3
*--- radiance parameters -------------------
SCENE_ROTATION_ANGLE=0 : GROUND_IDS=10004 : GROUND_REFLECTANCE=0.2 : SHADER_REFLECTANCE=0
CALC_MODE=CLASSIC : LATITUDE=48 : LONGITUDE=-9.2 : TIME_ZONE=-15 : SITE_ELEVATION=200
AB=5 : AD=1000 : AS=20 : AR=254 : AA=0.1
LR=6 : ST=0.15 : SJ=1 : LW=0.004 : DJ=0 : DS=0.2 : DR=2 : DP=512
Note: these Parameters aren’t included in the TRNBuild dialog window of “PROPERTIES”, they are defined in the TRNbuild dialog window “generate radiance files”.
Kind regards,
Marion
Marion Hiller
+49 711 679 76 32 |
hiller@transsolar.com
Transsolar SoftwareEngineering
Stuttgart | Munich | Paris | New York
Transsolar Energietechnik GmbH | Curiestrasse 2 | 70563 Stuttgart | Germany
CEO: Matthias Schuler, Thomas Auer, Stefan Holst, Dieter Schnelle
Registered at Amtsgericht Stuttgart HRB 23347 | USt-IdNr.: DE 152272639
Von: TRNSYS-users <trnsys-users-bounces@lists.onebuilding.org>
Im Auftrag von Freppel, Wirich via TRNSYS-users
Gesendet: Mittwoch, 25. März 2020 22:06
An: TRNSYS USERS (trnsys-users@lists.onebuilding.org) <trnsys-users@lists.onebuilding.org>
Cc: Freppel, Wirich <Wirich.Freppel@saint-gobain.com>
Betreff: [TRNSYS-users] Generate radiance file from cmd
Dear TRNsys users,
I would like to generate the radiance file from the Windows command window. I know how to do that for the calculation of VFM, by using trnvfm.exe, so I guess the same thing is possible for radiance file generation.
But with trnRAD.exe, it seems to be a little bit more complicated since there are options to set before generating the file, for example, selecting the pre-processing for daylight simulation.
As I would like to generate a “classic” radiance file, could you please give me a hint on the code line to write in order to properly generate the radiance file ?
Thank you in advance
|
Wirich FREPPEL Ph.D COSMOS -
Buildings Energy Performance & Daylighting Group
|
|
SAINT-GOBAIN RESEARCH COMPIEGNE 1 rue de Montluçon • BP 40103 • 60777 Thourotte • France Tel: +33 637 053 174 E-mail:
wirich.freppel@saint-gobain.com
|
|
|
Confidential - Property of Saint-Gobain, the information contained herein are considered confidential.
Their presentation or reproduction is prohibited without the prior written consent of the sender or author.