[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Question

Hi Aya,

I had to deal with the same issue recently, I used an input and set the setpoints in order to not have cooling when there is no occupancy. to achieve that I "26*Occypancy*SeasonC+100*(1-Occupancy*SeasonC)" where seasonC is the cooling season, Occupancy is an input from type14 (and 41a) schedule.

Hope that helps.

Regards,

Le 24/06/2019 à 09:20, aya khalil via TRNSYS-users a écrit :

Dear , 
 I trying to calculate the cooling demand of my office  building in TRNBUILD and would like the cooling demand to
response according to my occupancy schedule(less cooling at
night and more cooling at day). I try to define the set temp
 at the cooling type by i not sure which one should i use (schedule or input?) And also the equation behind it, because when i enter like for instance _25degree(set temp)
*occupancy schedule+0_, i would get 0 degree when there is
 no occupancy.
 Appreciate your kind assistance on this Email 
Aya khalil 
Master student at usj-beirut 

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org