[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] link between Type119c and Type56
Dear Wirich,
I would recommend to set a "Ventilation Type" in your building and insert temperature and flowrate of the supply air as "inputs " that could be then connected to the outlet air temperature and flowrate of the heat pump.
Best,
Hamid
Hamidreza Heidar Esfehani
Wissenschaftlicher Mitarbeiter|Research Associate
Leibniz Universität Hannover
IEK Abt.Gebäudetechnik
Herrenhäuser Str. 8
30419 Hannover
Telefon : +49 (0)511 762 3811
Fax : +49 (0)511 762 3016
hamidreza.esfehani@iek.uni-hannover.de
-----Ursprüngliche Nachricht-----
Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] Im Auftrag von Wirich FREPPEL via TRNSYS-users
Gesendet: Dienstag, 12. März 2019 17:40
An: trnsys-users@lists.onebuilding.org
Cc: Wirich FREPPEL <freppelw@noirot.fr>
Betreff: [TRNSYS-users] link between Type119c and Type56
Dear TRNSYS users,
I'm trying to use an air source heat pump (type 119c) as a heat source for my building. I consider the "total heating rate" output as the heating power of the building. Then, in order to use it, I set a "gain type", in which the input is the total heating rate. When I run the simulation, I get an error which deals with PSYCHOMETRICS (ERROR 118).
First of all, if using a gain type is a correct idea, what am I doing wrong?
Secondly, if it's not a good idea, what would be the best way to link the type 119c to Type56 ?
Thank you in advance for your help.
--
Wirich Freppel
Ingenieur Recherche et Développement
Centre R&D Noirot - Groupe Muller
8 rue Ampere, 02030 Laon
+33 (0)3 23 27 31 99
http://www.groupe-muller.fr/
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org