Dear TRNSYS-users,
I have a problem with
one of our models that was created under TRNSYS 16. I gave
it to a colleague in Italy using TRNSYS 18 (32 Bit). When
she is starting the simulation, she is getting the following
error:
“TRNSYS Message 313: The
TRNSYS version number specified in the input file is either
missing or does not match the TRNSYS source code number.”
The type was written in
the TRNSYS 16 coding standard. Could there be a problem with
16 models no more running under 18? According to the
Programmers Guide chapter 7.5.5. “There are no required
changes that a user must make to components that were
written in the TRNSYS 16 coding standard in order for them
to work the same in TRNSYS 17” and chapter 7.5.6 “There are
no changes required to move a component from the TRNSYS 17.x
Type coding standard to the TRNSYS 18.x Type coding
standard.”
So I thought that the
model should work under TRNSYS 18. Is that correct?
Any help would be
appreciated.
Kind regards,
Andreas
---
Andreas
Heinz
DI
(FH) Dr. techn.
Institut für Wärmetechnik / Institute of
Thermal Engineering
TU Graz / Graz University of Technology
Inffeldgasse 25b, A-8010 Graz
Tel: +43 316 873 7313
Fax: +43 316 873 7305
Email:
andreas.heinz@tugraz.at
IWT website:
www.iwt.tugraz.at