[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Condensate Pump and Closed Feedwater Heater



Filip,

When I run your closed feedwater heater specification in the latest version of TRNSYS it runs without issue.  May I ask what version of TRNSYS you are using?

 

Jeff

 

---
Jeff Thornton President - TESS LLC 22 N. Carroll Street, Madison WI USA 53703 Office: (608) 274-2577 Fax: (608) 278-1475 www.tess-inc.com E-Mail: thornton@tess-inc.com

On 08/10/2017 1:58 am, Filip Aksentijevic via TRNSYS-users wrote:

Hello everyone,

I am trying to create a Power Plant project in Trnsys 17_02 by using the components from Cogeneration (CHP) Library.  I  use the Condensate Pump (Type 597), which can reach the outlet pressures of up to 230 bar and cannot reach the desired outlet presure of 250 bar. When the outlet pressure is set to 250 bar, I recieve the message that TRNExe.exe is not responding. I recieve the same message when I use Closed Feedwater Heater (Type 621) to heat condensate (t=180 C, p=200 bar, h=773,5 kJ/kg, m=970020 kg/hr) with superheated steam (t=500 C, p=20 bar, h=3468 kJ/kg).
I hope someone can help me solve the problem.

Best regards,
Filip Aksentijevic

filipaksentijevic@vin.bg.ac.rs

 


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@lists.onebuilding.org
http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org