Filip,
The steam properties subroutine is only valid up to a pressure of 22 MPA. Above that point the steam has passed the critical point and the standard solution methodology fails. The code should be generating an error but it is not. We'll put that on the bug list and get it fixed for the next release. I'll take a look at the closed feedwater heater issue in a few minutes.
Jeff
---
Jeff Thornton President - TESS LLC 22 N. Carroll Street, Madison WI USA 53703 Office: (608) 274-2577 Fax: (608) 278-1475 www.tess-inc.com E-Mail: thornton@tess-inc.com
On 08/10/2017 1:58 am, Filip Aksentijevic via TRNSYS-users wrote:
Hello everyone,
I am trying to create a Power Plant project in Trnsys 17_02 by using the components from Cogeneration (CHP) Library. I use the Condensate Pump (Type 597), which can reach the outlet pressures of up to 230 bar and cannot reach the desired outlet presure of 250 bar. When the outlet pressure is set to 250 bar, I recieve the message that TRNExe.exe is not responding. I recieve the same message when I use Closed Feedwater Heater (Type 621) to heat condensate (t=180 C, p=200 bar, h=773,5 kJ/kg, m=970020 kg/hr) with superheated steam (t=500 C, p=20 bar, h=3468 kJ/kg).
I hope someone can help me solve the problem.Best regards,
Filip Aksentijevicfilipaksentijevic@vin.bg.ac.rs
_______________________________________________ TRNSYS-users mailing list TRNSYS-users@lists.onebuilding.org http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org