Vincent, you can use the balance outputs of Balance 4 energy balance of zone. (see documentation of type56) You must be careful were the “boundary” is. For this balance 3 the inner surface “node” is the boundary. Marion -----------------------------------------------------------------------------------------------------------------------------------------------------------
Dipl.-Ing. Marion Hiller www.transsolar.com/ Amtsgericht Stuttgart - HRB 23347
/ Steuernummer: 99073/00911 / USt-IdNr.: DE 152272639 Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org]
Im Auftrag von Vincent Höfte via TRNSYS-users Dear all, I am making a generic energy model with a multizone building, based on the standard heat balance 0 = Qdemand_heat/cool + Qtransmission + Qinfiltration + Qventilation + Qinternal_gains + Qsolar gains In which Qinternal_gains refers to people and appliances. I can't figure out which NTYPE I should use for both Qtransmission and Qsolar gain. For both of them, there is a lot of specific NTYPES that regard a part of these energy flows. However, I wish to use the NTYPE so that the final balance
is always equal to zero, thus the Total transmission of heat through all surfaces and the total transmission of solar through all windows. Currently I use
Could you help me choosing the right NTYPES? Thanks! |