Re: [TRNSYS-users] Matlab - Trnsys coupling

[via TRNSYS-users <trnsys-users@lists.onebuilding.org>]

Dear Sir,

I am also facing the same problem, I would like to use the type155 to 
couple Trnsys 17 (type56) with Matlab.
I have installed Matlab R2013b.
In the> ..\TrnsysXX\Exe\ directory, I can't find Type155.dll that is 
compiled for the version of Matlab that I am using ( R2013b). Can you 
please send it to me also?

I have to delete all other types 155 dll and just keep the one that 
compiles my Matlab version?
in the example file, I just found one example of coupling type 155 with 
a solar collector, there is no another example of coupling type 155 with 
type 56??

Thank you,
Regards




Le 2016-12-12 16:58, David BRADLEY via TRNSYS-users a écrit :
> Jean-Christophe,
>
>   In the case of Matlab and Type155, the dll needs to be in the
> ..\TrnsysXX\Exe\ directory instead of in the
> ..\TrnsysXX\UserLib\ReleaseDLLs\ directory.
>
>   Also, the Type155.dll has to be the one compiled for the version of
> Matlab that you are using (in your case R2013b). I will send you the
> Type155.dll file for Matlab2013b in a second email. However, I caution
> that this dll was never tested with Trnsys16, only with Trnsys17
> (which was released in 2009). I cannot be sure whether it will work or
> not. If it doesn't I am afraid that there isn't much else that I can
> offer; support for Trnsys16 was discontinued a year after the release
> of v17.
>
> kind regards,
>
>  David
>
>
>
> On 12/12/2016 09:06, Jean-Christophe VALLEE via TRNSYS-users wrote:
> > Dear all,
> >
> > I am sure you already discussed about this topic but I'm a new user of 
> > Trnsys and need your assistance.
> >
> > I would like to use the type155 to couple Trnsys 16 with Matlab. I 
> > have already read that I need a compatible version of Matlab. So I 
> > installed Matlab R2013b 32bits. I also added to my Windows path the 
> > bin\win32 path folder of this matlab version and have deleted the 
> > other version of Matlab installed on my computer to avoid any problem.
> >
> > When I try to launch my project, even the project-example provided by 
> > Trnsys, I have this error message, that you certainly know : "TRNSYS 
> > Message 105: A TYPE was called in the TRNSYS input file but was either 
> > not linked into trndll.dll or was not found in an external dll. A 
> > dummy subroutine was called in its place. Please link the TYPE or 
> > remove it from the input file. Reported information : Type 155 was not 
> > found. Please make sure that Type155.dll is in the "Userlib" folder"
> >
> > The type55.dll is well in the Userlib folder.
> >
> > I have read on a topic that I must have a 32bits version of Windows. I 
> > am currently running on Windows 10 64bits.
> >
> > May you please confirm that I have to install a 32bits version of 
> > Windows or do you have any suggestions to couple properly Trnsys and 
> > Matlab.
> >
> > Kindest regards,
> >
> >
> > Jean-Christophe Vallée
> >
> >
> > Ecole Normale Supérieure Paris-Saclay, France
> > Politecnico di Torino, Italy
> >
> > _______________________________________________
> > TRNSYS-users mailing list
> > TRNSYS-users@lists.onebuilding.org
> > http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley@tess-inc.com
>
> http://www.tess-inc.com
> http://www.trnsys.com
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users@lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org