[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Gen-Opt with TRNOPT



Dear Khem Raj Gautam,

 

all the results can be found within the File:

 

c:\Trnsys17\Optimization\GenOpt\Simulation\OutputListingAll.txt

 

 

With sunny regards,

Richard

 

---

Richard Heimrath 

Dr. techn. Dipl.-Ing.

Institut fuer Waermetechnik / Institute of Thermal Engineering

Div. Energy-Efficient Buildings

TU Graz / Graz University of Technology

A-8010 Graz . Inffeldgasse 25b . Austria

 

Tel: +43 (316) 873 7317

Fax: +43 (316) 873 7305

E-mail: heimrath@tugraz.at

IWT web site: www.iwt.tugraz.at

 

 

 

-----Ursprüngliche Nachricht-----
Von: TRNSYS-users [mailto:trnsys-users-bounces@lists.onebuilding.org] Im Auftrag von Georgios Kyriakarakos via TRNSYS-users
Gesendet: Montag, 05. Dezember 2016 13:35
An: bridjesh gautam <bridjeshgautam@gmail.com>; TRNSYS users mailing list at OneBuilding.org <trnsys-users@lists.onebuilding.org>
Cc: trnsys-users@lists.onebuilding.org
Betreff: Re: [TRNSYS-users] Gen-Opt with TRNOPT

 

Dear Khem Raj Gautam,

 

I have faced the same problem in the past. What you can do is copy the results from the grey column on the left (with ctrl+C) and paste them in a notepad, from where you can open them with any software you want, and also the window with the diagram can be captured via print screen.

Not the best approach, but it works...

Best regards,

 

George

----------------------------------------------------------------------------

Dr. George Kyriakarakos, Agricultural Engineer

MSc Energy Systems & Renewable Energy Sources, PhD.

Agricultural University of Athens,

Dept. of Natural Resources and Agricultural Engineering

Iera odos street, 75, Athens 11855, Greece

Tel. +30.210.5294046 (direct), Fax: +30.210.5294023

Mobile +30.6942.046895

e-mail: <gk@aua.gr>

----------------------------------------------------------------------------

 

 

----- Original Message -----

Από: bridjesh gautam via TRNSYS-users <trnsys-users@lists.onebuilding.org>

Ημερομηνία: Monday, December 5, 2016 10:55 am

Θέμα: [TRNSYS-users] Gen-Opt with TRNOPT

Προς: trnsys-users@lists.onebuilding.org

 

 

> Dear TRNSYS Users,

> It seems when I use TRNOPT, the results files from each Gen-opt simulation

> is not written in the printer like when using parametric runs. Gen-opt

> results window does display the results but I could not find a way to

> save

> them.

> I would be glad if somebody can explain  how to save results of each

> gen-opt simulations?

>

> Yours

> Khem Raj Gautam

> Aarhus University

> _______________________________________________

> TRNSYS-users mailing list

> TRNSYS-users@lists.onebuilding.org

> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org

_______________________________________________

TRNSYS-users mailing list

TRNSYS-users@lists.onebuilding.org

http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org